Zenner multipulse Manuel d'utilisateur télécharger pdf (Page 6)

Subject to modications and errors excepted. Any liability for misprints excluded. SAP124288_150601_EN

Installation instructions

Safety instructions

The installation has to be done by qualied per-

sonnel. Read the instructions carefully right up to

the end before starting to mount the device.

The current laws and regulations regarding the

installation have to be observed

At devices with communication interfaces or

mains supply the general technical rules and the

correspondent regulations have to be followed.

General Information

Take care of:

■ the display of the module must readable at all

times,

■ to avoid malfunctions due to other interfer-

ences do not install uorescent lamps, switch

cabinets or electric devices such as motors or

pumps in the immediate vicinity of the module

(minimum distance 1 m),

■ the ambient temperature must not exceed

55°C,

■ the pulse value of the meter must correspond

with the one from the module.

The module has 7 cable glands for wires with a

diameter between 4,2 and 10 mm. Keep unused

glands closed. multipulse resp. multilog is deliv-

ered ready for operation. It does not need any set-

tings or adjusting.

ZENNER International GmbH & Co. KG

Römerstadt 6

D-66121 Saarbrücken

Telephone +49 681 99 676-30

Telefax +49 681 99 676-3100

E-Mail info@zenner.com

Internet www.zenner.com

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Zenner multipulse Manuel d'utilisateur Page 6