Zenner multipulse Manuel d'utilisateur télécharger pdf (Page 2)

General information

With multipulse resp. multilog you have acquired

one of the most up-to-date and modern electron-

ic pulse counter modules currently available on

the market.

Expressive symbols in the display and easy

menu navigation make readout simple. It can be

operated with one single button. The change of

pulse values and the setting of the data loggers

with multilog is being done via the software GMM.

The pulse counter module is equipped with a long-

life battery made for operation during a period of 5

years including a reserve of at least another year.

With a second battery you will reach 11 years.

Electro-magnetic interference

multipulse resp. multilog fulls the national and

international requirements for interference resis-

tance. To avoid malfunctions due to other inter-

ferences, do not install uorescent lamps, switch

cabinets or electric devices such as motors or

pumps in the immediate vicinity of the meter

(minimum distance 1 m). Cables leaving the

meter should not be laid parallel to live cables

(230V, minimum distance 0.2 m).

Cables leaving the meter should not be laid paral-

lel to live cables (230V, minimum distance 0.2 m).

The device complies with Directive 89/336/EEC

(electromagnetic compatibility).

Care instructions

Clean plastic surfaces with a damp cloth only.

Do not use any scouring or aggressive cleaning

agents! The device is maintenance-free during

the service life. Repairs can only be made by the

manufacturer. The most up-to-date information

about this product and of our installation notice

can be found at www.zenner.com.

1 2 3 4 5 6 7 ... 11 12

Pas de commentaire

Zenner multipulse Manuel d'utilisateur Page 2